BLTCQ - INDUSTRIAL ENAMEL, 139-137/139-1030 BLUE

  • MSDS: BLTCQ
  • Manufacturer: CORONADO PAINT COMPANY
  • Product Name: INDUSTRIAL ENAMEL, 139-137/139-1030 BLUE
  • National Stock Number: 8010-00N017732
Product Identification

Product ID:INDUSTRIAL ENAMEL, 139-137/139-1030 BLUE
MSDS Date:12/16/1987
FSC:8010
NIIN:00N017732
MSDS Number: BLTCQ

Responsible Party
CORONADO PAINT COMPANY
308 OLD COUNTY ROAD
EDGEWATER, FL 32032
US

Emergency Phone: 904-428-6461

Info Phone: 904-428-6461

Cage: 33200

Contractor
CORONADO PAINT COMPANY, INC.
EDGEWATER, FL 32132-1812 US

Telephone: 904-428-6461

Cage: 33200

Ingredients

PIGMENTS

Fraction By Weight: 12.31%


VEHICLE

Fraction By Weight: 37.31%


AROMATIC HYDROCARBONS

Fraction By Weight: 50.38%

ACGIH TLV: 100 PPM (MFR)

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN:DRYING. EYE:IRRITATION.
INHAL:EXCESSIVE EXPOSURE MAY CAUSE ANESTHESIA, HEADACHE, DIZZINESS,
NAUSEA, & UPPER RESPIRATORY IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INHAL:REMOVE TO FRESH AIR, APPLY ARTIFICIAL RESPIRATION IF
NECESSARY. CALL MD. SKIN:WASH W/MILD SOAP & WATER, APPLY A MILD
SKIN CREAM. IN SEVERE CASES, CALL MD. EYE:FLUSH W/WATER FOR AT
LEAST 15 MINUT ES. CALL MD. INGEST:CALL MD.

Fire Fighting

Flash Point Method:SCC
Flash Point:45.0F,7.2C
Lower Limits:1%
Upper Limits:7%
Extinguishing Media:FOAM, CARBON DIOXIDE OR DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:VAPORS MAY FORM EXPLOSIVE MIXTURES W/AIR.

Accidental Release

Spill Release Procedures:WASH W/WATER INTO RETAINING AREA OR CONTAINER.
AVOID SPARKS, FIRE OR HOT METAL SURFACES. SMALL QUANTITIES MAY BE
ABSORBED ONTO AN APPROPRAITE ABSORBANT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP COOL & AWAY FROM SOURCES OF
IGNITION. USE W/ADEQUATE VENTILATION. AVOID PROLONGED OR REPEATED
PERSONAL CONTACT.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:ABOVE TLV USE NIOSH/MSHA CARTRIDGE RESPIRATOR OR
GAS MASK.
Ventilation:LOCAL EXHAUST:USE WHATEVER IS SUFFICIENT TO KEEP WORKROOM
CONCENTRATION BELOW TLV.
Protective Gloves:IMPERMEABLE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:APRON & BARRIER CREAM.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:F3
Boiling Pt:B.P. Text:235F,113C
Vapor Pres:23 @ 68F
Vapor Density:3.2
Spec Gravity:1.059
Evaporation Rate & Reference:1.9 (N-BUTYL ACETATE=1)
Solubility in Water:NONE
Appearance and Odor:LIGHT BLUE OPAQUE LIQUID; PUNGENT AROMATIC ODOR.
Percent Volatiles by Volume:63

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY YIELD CARBON
MONOXIDE & CARBON DIOXIDE.

Disposal

Waste Disposal Methods:INCINERATE UNDER SAFE CONDITIONS OR DISPOSE OF
ACCORDING TO APPLICABLE LOCAL, STATE & FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.